On Tue, Feb 11, 2020 at 7:40 PM Bruce Layne <linux...@thinkingdevices.com> wrote:
> Maybe remove most of the oily gunk with acetone, scrub with 60-100 grit > sandpaper to create a rough surface for the epoxy to grab, then flood > with isopropyl alcohol to thoroughly degrease the part prior to applying > epoxy. Maybe clean the residue with isopropanol BEFORE scouring the surface---otherwise you could introduce oil into crevices that it'll be hard to get out of. Then sandpaper, and maybe one more isopropanol wipe for good measure. _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users