On Sunday 03 May 2020 11:22:57 Jon Elson wrote: > On 05/02/2020 11:05 PM, andrew beck wrote: > > Hey guys. I have a bit of a strange issue here. > > > > I just put a new touch screen monitor on my cnc today. I have not > > changed any ini file stuff or hal files. Just the monitor > > > > before the change everything worked fine and I could see the actual > > machine extends on the screen which was quite nice to know where the > > machine is relative to home switches etc. I have been running jobs > > all week. and everything has been fine. > > > > Now with the new monitor for some reason the extends don't show on > > the screen. everything else works perfectly. > > The extents of the toolpath show in red. Have you checked > that all the colors are working properly on the new > monitor? I don't remember MACHINE extents being shown, but > I am still on a fairly old version, here. > But, it seems machine extents can't be shown relative to the > toolpath until the machine is homed and the axes have been > touched off or have the offset set. > > Jon > Curious, I just tried all 4 of my machines. Extents are displayed in the unhomed, just invoked state, on all 4 machines. All are running recent copies of master. > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
