> -----Original Message----- > From: andy pugh [mailto:bodge...@gmail.com] > Sent: May-04-20 10:22 AM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] quick question on machine extents > > On Mon, 4 May 2020 at 16:44, Jon Elson <el...@pico-systems.com> wrote: > > > But, that is NOT Axis. Is that Path Pilot? > > That's "Probe Basic", one of the third-party GUIs being discussed elsewhere. > (He said he is using that as it shows extents, whereas Axis doesn't) >
On Axis there's a check box called Show machine limits in the View menu. Would not all of the various graphical interfaces have something similar? Even if it needs to be set as an INI flag rather than a screen checkbox? And in order to work doesn't the machine envelope have to be described? Otherwise you might well have homed and know where one end is, but the other end isn't searched for but instead is a parameter. Again, why wouldn't all the user interfaces have the same thing? John > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > � George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
