An odd version of a quick change toolpost. Doesn't rotate so the tools will
always be aligned. Could mount two tools if they're spaced far enough apart so
each can be used without the other hitting anything. Could mount two of these
posts to have up to 4 tools.
Another way to do this is with dovetail blocks where the dovetail faces the
chuck and each holds one tool. Do a search for CNC gang tooling. Works like a
tool turret without the need for the turret, motor, and control, but limited by
the cross slide travel.
On Tuesday, May 26, 2020, 10:16:05 AM MDT, Curtis Dutton
<curtd...@gmail.com> wrote:
Apologies.
https://drive.google.com/file/d/1A4zx2k4i04BCbur2fUuA0I2t8Df3C7TY/view?usp=sharing
On Tue, May 26, 2020 at 10:45 AM andy pugh <bodge...@gmail.com> wrote:
> On Tue, 26 May 2020 at 15:35, Curtis Dutton <curtd...@gmail.com> wrote:
>
> > Here is a picture of a tool holder that came with it.
>
> I don't think that photos come through on the mailing list.
>
> You use Gmail, so should be able to host and share the photo on
> photos.google.com
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
