On Sunday 09 August 2020 23:48:24 Gregg Eshelman via Emc-users wrote: > Scroll down farther. It's for Windows, Mac, Linux, and Chrome > Wouldn't have posted it for a Linux user to look at it if was only > for Windows. > > On Sunday, August 9, 2020, 3:54:20 AM MDT, Gene Heskett > <ghesk...@shentel.net> wrote: > > On Sunday 09 August 2020 03:29:38 Gregg Eshelman via Emc-users wrote: > > Try CraftWare https://craftbot.com/software > Got it, now to take it for a walk. Later.
> Only for windows > > > On Saturday, August 8, 2020, 1:12:17 PM MDT, Gene Heskett > > <ghesk...@shentel.net> wrote: > > > > On Wednesday 05 August 2020 12:28:27 Gene Heskett writes: > > > > Cura has a mind of its own. I have now wasted 3 days trying to get > > it to lay down, because all the stl files for this project load > > standing on edge, to first put the correct face down on the build > > plate, and 2nd a 101.5% scale up for the XY distances. Obviously > > there is a linkage between XYZ that can't be disabled, because > > anything I touch with the mouse after setting those values in the > > scale menu on the left, then fills those values in again with its > > own data, ignoreing my choices. > > > > I've looked at slic3r, finally got it running, and the first thing I > > note is that the .stl isn't round, but off by .05mm between xy, and > > while cura looks like it can fix that but won't, slice3r has that > > locked, so you can scale it all only. I can't find a disconnect > > function. > > > > I have octoprint. but again it will not run here. Needs a wagon > > load of python stuff I can't find. > > > > So what slicer is available, will do what you tell it, and runs on > > linux? _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > Cheers, Gene Heskett Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
