On Sunday 09 August 2020 03:29:38 Gregg Eshelman via Emc-users wrote: > Try CraftWare https://craftbot.com/software > Only for windows > > On Saturday, August 8, 2020, 1:12:17 PM MDT, Gene Heskett > <[email protected]> wrote: > > On Wednesday 05 August 2020 12:28:27 Gene Heskett writes: > > Cura has a mind of its own. I have now wasted 3 days trying to get it > to lay down, because all the stl files for this project load standing > on edge, to first put the correct face down on the build plate, and > 2nd a 101.5% scale up for the XY distances. Obviously there is a > linkage between XYZ that can't be disabled, because anything I touch > with the mouse after setting those values in the scale menu on the > left, then fills those values in again with its own data, ignoreing my > choices. > > I've looked at slic3r, finally got it running, and the first thing I > note is that the .stl isn't round, but off by .05mm between xy, and > while cura looks like it can fix that but won't, slice3r has that > locked, so you can scale it all only. I can't find a disconnect > function. > > I have octoprint. but again it will not run here. Needs a wagon load > of python stuff I can't find. > > So what slicer is available, will do what you tell it, and runs on > linux? _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
