On 9/11/20 11:49 PM, Leonardo Marsaglia wrote:
These look like the ones I use on my Skyfire Mill. The only problem
I've had is over driving my x axis into the side of steel case and
breaking it off the table. Not the motors fault the other two are still
working 3 years later. I replaced with the original.
Hello Hubert, and thanks for your feedback.
That really makes me feel a lot more confident about them. My major concern
was reliability because the idea is to use these 8 to 10 hours a days
easily. Since they are cheap enough I can always have a backup drive just
in case.
By the way, what happened to your X axis sounds really painful. Hope your
machine is doing well now :).
It cost a motor and a shaft coupler. At the time I had a spare motor
and had to jury rig a coupler. I now have replacements for both on the
shelf In case I get stupid again.
El vie., 11 sept. 2020 a las 17:29, hubert (<h...@hbahr.org>) escribió:
On 9/11/20 2:21 PM, Leonardo Marsaglia wrote:
Helo to all,
I found these on Aliexpress:
https://www.aliexpress.com/item/1005001376368510.html?spm=2114.12010612.8148356.2.5d5325f21j0XN8
These look like the ones I use on my Skyfire Mill. The only problem
I've had is over driving my x axis into the side of steel case and
breaking it off the table. Not the motors fault the other two are still
working 3 years later. I replaced with the original.
What do you think? The price is more than good. The seller has good
feedback on all the listings but sadly, no enough sales to be sure.
I'm tempted to buy these to drive the router but I don't really know if
they will be reliable enough.
Thanks as always.
Leonardo
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
