On Sunday 13 September 2020 01:54:26 John Dammeyer wrote: > > -----Origin > > I am running a 1 ms servo-thread and a 5ms jog-thread and moved all > > the non time critical stuff to that slower thread. Stuff to service > > the twin jog dials etc is in the slower loop. I did that to make > > life easier on the pi3, and its worked so well I haven't undone it > > since putting a pi4 in a year ago. I am not using an ethernet card, > > but the 7i90HF rpspi driven interface. My ethernet is used for more > > normal stuff like keeping it updated. > > Cheers, Gene Heskett > > The hardwire Ethernet on 192.168.1.xx to the 7i92H with 192.168.1.121 > to match my PC based system while also having the WiFi on 192.168.0.97 > was the hard part. The Pi OS did not want to allow two separate > groups. I ended up cleaning the MicroSD card and starting over. And > then changed the order I did things. And I forgot to make notes so I > don't remember exactly what I did. > > But now it reliably boots up the newly released 2.8.0 and I can browse > through the folders and download gcode files from my PC. Screen shot > attached. I just drag and drop. No command line needed. > > John Dammeyer
I don't enable the wifi. I have a neighbor that will use 100gb a month using my bandwidth instead of his with his smartphone. So all my networking is hard wired. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
