On Sun, 8 Nov 2020 at 22:03, Viesturs Lācis <viesturs.la...@gmail.com> wrote:
> I am stuck on a problem that I cannot figure out. > Please take a look here: https://youtu.be/LtP9wE-FUN4 > It should be steady jogging back and forth at 1074 mm/min. The motor > is not moving at a constant pace This can happen if the stephen maxvel / maxacc is lower than the Axis. But that does not appear to be the case in your config. I think I would have a look in halshow, though, just to make sure that the values are getting set correctly. If the DRO shows the issue then it's internal to LinuxCNC, you have no external feedback. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
