Perhaps a silly question but... What are the restrictions on the arguments for the G0, G1, G2 and G3 moves defined in the O-word block? Can G71 be used for mill turning? That is, tool mounted on table and stock held in the spindle.
-----Original Message----- From: andy pugh <bodge...@gmail.com> Sent: November 14, 2020 2:25 PM To: Enhanced Machine Controller (EMC) <emc-users@lists.sourceforge.net> Subject: Re: [Emc-users] canned cycles On Fri, 13 Nov 2020 at 23:43, R C <cjv...@gmail.com> wrote: > btw: where can I find that "Python remap" for the canned G71 and G72 > g codes? https://github.com/LinuxCNC/linuxcnc/tree/andypugh/g71type2remap/configs/sim/axis/g71 For the remap files and a sample .ini with the requisite additions. https://github.com/LinuxCNC/linuxcnc/blob/andypugh/g71type2remap/docs/src/gcode/g-code.txt#g71-lathe-roughing-cycle-turning For the docs for _that_version_ of G71. Note that the letter allocations are different in the version that is in master / 2.9 -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users