On 11/14/20 4:12 PM, andy pugh wrote:
On Sat, 14 Nov 2020 at 22:25, R C <cjv...@gmail.com> wrote:
That takes care of the python errors, however, it complains about not
knowing what u is, as in:
G71 U.1 R.05
Yes, that version doesn't use U or W as in LinuxCNC G-code those are
axis designators.
https://github.com/LinuxCNC/linuxcnc/blob/andypugh/g71type2remap/docs/src/gcode/g-code.txt#g71-lathe-roughing-cycle-turning
I have no idea what you just said.
Are here any examples, canned cycles, that can be used with linuxcnc on
a lathe, and that I can figure out what it is theu do?
thanks,
Ron
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users