Try the Wayback Machine https://web.archive.org/web/*/https://www.elmomc.com/ If the documents were direct links and you didn't have to do things like register and login to get the manuals, the Wayback Machine may have grabbed them. On Tuesday, December 1, 2020, 10:40:49 AM MST, Todd Zuercher <[email protected]> wrote: Anyone out there have any documentation for an older Elmo, DC brushed servo amp/drive, model SSA-8/100? Elmo's web site seems to only cover their current product line.
I have some machines using those amps. The control on one of them is setting an alarm "FAULT IN Y AXIS". The control's documentation is useless, the only trouble shooting it has is "Check Servo-Amp Board, circuit & wiring for the affected axis. Repair/replace as required." The amps are all powered, the motor and encoders are connected, all 3 amps show the same LEDs lit, swapping motors has no effect, swapping cables has no effect, and swapping amps has no effect, I can't think of what else to try. _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
