U.S. listing of Andy's adapter https://www.amazon.com/gp/product/B082KKG55T?pf_rd_r=065XPWF7ZTHWN85F18N6&pf_rd_p=9d9090dd-8b99-4ac3-b4a9-90a1db2ef53b I'm curious what the rationale is for alligator clips. Eric Keller Boalsburg, Pennsylvania
On Fri, Dec 4, 2020 at 6:59 AM andy pugh <bodge...@gmail.com> wrote: > On Fri, 4 Dec 2020 at 00:52, Gene Heskett <ghesk...@shentel.net> wrote: > > > I currently have a 5i25, driving a cnc4pc c1g bob on P2, with a 7i76D on > > P3. I can use the spindle controls of the 7i76D or I might be able to > > talk to it thru rs485. Which is the better control, and if its the > > rs485, what module does that need > > RS485 is likely to give more info about what is going on inside the > VFD, but will have worse real-time performance. So not as good for CSS > on a lathe but probably OK on a mill. > (Except it might introduce some dither on where the reverse is when > rigid tapping) > > But RS485 is only an option if there is an existing LinuxCNC driver, > or you want to write one. > > I am using this to hook up my high-speed spindle: > > https://www.amazon.co.uk/DSD-TECH-SH-U13-Alligator-Compatible-black/dp/B082KKG55T > With the alligator clips cut off. > No, before you say it, they probably won't deliver to you, but you can > probably find the same thing from a US vendor. > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
