I've been pondering this for a while now, wondering if there's a design shape that has been missed. In terms of a fresh design, things that could be done; - increase the length of the cup - put cutouts in strategic places - use a cone rather than a cup - make the cup in more than one piece (flexspline +CV bearing)
On Tue, 5 Jan 2021 at 19:28, andy pugh <bodge...@gmail.com> wrote: > I bought an FHA-17C actuator from eBay. It was cheaper than normal, > for parts or not working. > It clearly had the cables cut off, so I decided to gamble. > > It turns out that things were worse than I hoped. > > https://photos.app.goo.gl/p3SL2Bwv2b9yd5XJ9 > > I am seriously considering trying to make a new flexspline. I mean, > how hard can it be? > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users