it makes it so the bounding box doesn;t really make sense,,, http://electronicsam.com/images/greenmachine/Screenshot_2021-03-30_18-50-41.png
On Tue, Mar 30, 2021 at 6:44 PM Sam Sokolik <[email protected]> wrote: > > http://electronicsam.com/images/greenmachine/Screenshot_2021-03-30_18-00-14.png > > that is the screenshot - the gcode from andy is here.. > > > https://forum.linuxcnc.org/20-g-code/27169-g-code-to-engrave-numbers-on-cylinders?start=0 > > On Tue, Mar 30, 2021 at 6:38 PM John Dammeyer <[email protected]> > wrote: > >> Photo yes. No G Code if that was supposed to be attached. I find when I >> run the CAM simulation on VisualCAM (AlibreCAM) that the tool moves around >> the work piece rather than the work piece image rotating. If that's what >> you meant. >> If you attach the G-Code I can try it here on my A axis. >> John >> >> > -----Original Message----- >> > From: Sam Sokolik [mailto:[email protected]] >> > Sent: March-30-21 4:05 PM >> > To: Enhanced Machine Controller (EMC) >> > Subject: [Emc-users] Rotary axis preview (in axis interface) >> > >> > Has anyone done work on the preview for a 4th axis mounted on the table? >> > I feel like in this situation - the gcode preview should be spinning >> while >> > the tool tip stay stationary... Uless I have the geometry set wrong - >> but >> > currently I have it set to AXYZ. I think I have tried all compinations >> - >> > but the tool seems to move around the gcode - instead of the gcode >> moving >> > around the tool... >> > >> > http://electronicsam.com/images/greenmachine/IMG_20210329_220745.jpg >> > >> > sam >> > >> > let me know if the attachment comes through... >> >> >> >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
