I downloaded from that link and LinuxCNC complains here: #<_feed> = 20 With cannot assign read only parameter.
> -----Original Message----- > From: Sam Sokolik [mailto:samco...@gmail.com] > Sent: March-30-21 4:44 PM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] Rotary axis preview (in axis interface) > > http://electronicsam.com/images/greenmachine/Screenshot_2021-03-30_18-00-14.png > > that is the screenshot - the gcode from andy is here.. > > https://forum.linuxcnc.org/20-g-code/27169-g-code-to-engrave-numbers-on-cylinders?start=0 > > On Tue, Mar 30, 2021 at 6:38 PM John Dammeyer <jo...@autoartisans.com> > wrote: > > > Photo yes. No G Code if that was supposed to be attached. I find when I > > run the CAM simulation on VisualCAM (AlibreCAM) that the tool moves around > > the work piece rather than the work piece image rotating. If that's what > > you meant. > > If you attach the G-Code I can try it here on my A axis. > > John > > > > > -----Original Message----- > > > From: Sam Sokolik [mailto:samco...@gmail.com] > > > Sent: March-30-21 4:05 PM > > > To: Enhanced Machine Controller (EMC) > > > Subject: [Emc-users] Rotary axis preview (in axis interface) > > > > > > Has anyone done work on the preview for a 4th axis mounted on the table? > > > I feel like in this situation - the gcode preview should be spinning > > while > > > the tool tip stay stationary... Uless I have the geometry set wrong - > > but > > > currently I have it set to AXYZ. I think I have tried all compinations - > > > but the tool seems to move around the gcode - instead of the gcode moving > > > around the tool... > > > > > > http://electronicsam.com/images/greenmachine/IMG_20210329_220745.jpg > > > > > > sam > > > > > > let me know if the attachment comes through... > > > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users