On 4/6/21 10:24 PM, dave engvall wrote:
OK, so I download 20210210_raspi_4_buster.img.xz
check sha256 and it matches
make a *.img out of it.
attempt to install the rpi-imager .... no x86 version. so use dd
dd to SD: dd bs = 1M if=202010210-raspi_4.buster.img
of=/media/dave/3339-3839/rpi_4_buster
unmount
put SD in rpi4B and power up
get the same error messages as before:
autoboot.txt not found
config.txt not found
recover4.elf not found
recovery.elf not found
start.elf not found
SD boot failed
So is the .img missing bits and pieces or are there steps beyond the
dd of the image that need to
add the missing files? If so where do I look for these files?
Dave
On 4/6/21 4:47 PM, andy pugh wrote:
On Tue, 6 Apr 2021 at 22:56, Feral Engineer
<theferalengin...@gmail.com> wrote:
Have you experienced crashes in lcnc on a pi4b?
TBH I haven't really used it. I have lots of other LinuxCNC machines
which actually have monitors.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
