On Wednesday 07 April 2021 01:24:35 dave engvall wrote: You can use dd, on an x86 box to write the u-sd card, that is not the problem, but here is the problem, you did NOT start with the raspbian #####.iso file. It will be complete with all that.
> OK, so I download 20210210_raspi_4_buster.img.xz From what url, I'll look and make sure you can get the right stuff. > check sha256 and it matches > make a *.img out of it. > attempt to install the rpi-imager .... no x86 version. so use dd > dd to SD: dd bs = 1M if=202010210-raspi_4.buster.img > of=/media/dave/3339-3839/rpi_4_buster > unmount > put SD in rpi4B and power up > get the same error messages as before: > > autoboot.txt not found > config.txt not found > recover4.elf not found > recovery.elf not found > start.elf not found > SD boot failed > > So is the .img missing bits and pieces or are there steps beyond the > dd of the image that need to > add the missing files? If so where do I look for these files? > > Dave > > On 4/6/21 4:47 PM, andy pugh wrote: > > On Tue, 6 Apr 2021 at 22:56, Feral Engineer <theferalengin...@gmail.com> wrote: > >> Have you experienced crashes in lcnc on a pi4b? > > > > TBH I haven't really used it. I have lots of other LinuxCNC machines > > which actually have monitors. > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
