I'm the author of the thermistor component, and it does not work as well as I had hoped. I've switched to using lincurve for the thermistors on my linuxcnc 3d printer.
On Thu, Apr 29, 2021, 12:16 andy pugh <bodge...@gmail.com> wrote: > On Thu, 29 Apr 2021 at 18:28, Peter C. Wallace <p...@mesanet.com> wrote: > > > The resistance vs temperature is quite nonlinear so you would probably > need to > > feed the analog value to lincurve to linearize the temperature readout > > Or http://linuxcnc.org/docs/2.8/html/man/man1/thermistor.1.html > > (lincurve might actually be better) > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users