That reminds me. I need to do just the same thing curtis On Fri, 30 Apr 2021, 6:53 AM Curtis Dutton, <[email protected]> wrote:
> Armed with an infrared thermometer and lincurve sounds like I can get a > nice solution. It doesn't have to be very accurate...just "stop before the > motor melts". Which being that I"m cutting teensy pieces of aluminum, will > probably never happen. But I tend to need guard rails sometimes! > > On Thu, Apr 29, 2021 at 2:45 PM Sebastian Kuzminsky < > [email protected]> > wrote: > > > I'm the author of the thermistor component, and it does not work as well > as > > I had hoped. I've switched to using lincurve for the thermistors on my > > linuxcnc 3d printer. > > > > On Thu, Apr 29, 2021, 12:16 andy pugh <[email protected]> wrote: > > > > > On Thu, 29 Apr 2021 at 18:28, Peter C. Wallace <[email protected]> > wrote: > > > > > > > The resistance vs temperature is quite nonlinear so you would > probably > > > need to > > > > feed the analog value to lincurve to linearize the temperature > readout > > > > > > Or http://linuxcnc.org/docs/2.8/html/man/man1/thermistor.1.html > > > > > > (lincurve might actually be better) > > > > > > -- > > > atp > > > "A motorcycle is a bicycle with a pandemonium attachment and is > > > designed for the especial use of mechanical geniuses, daredevils and > > > lunatics." > > > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > > > > > > > _______________________________________________ > > > Emc-users mailing list > > > [email protected] > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
