On Fri, 18 Jun 2021 at 16:52, John Dammeyer <jo...@autoartisans.com> wrote:
> I'm thinking the better approach would be to drill all the way through > undersize 3/8" and then drill half way with 13mm. Then only use the boring > tool to bring the back half up to 3/8" and the front up to 14mm. I would drill 8.5mm then bore all the way through to 3/8 for the fit I wanted on the encoder shaft. Then bore half way through to the 14mm testing the motor fit. The point is that you can machine the 3/8 first on the accessible side of the work, then machine half of it away. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users