On Mon, 19 Jul 2021 at 01:41, John Dammeyer <[email protected]> wrote:
> The disk spring setup would be great if the only thing I used was TT Tooling. > But if I remove the R8 3/4" flat top collet and insert my 3/4" R8 drill > chuck the springs seem like they'd be an issue. You might be able to convert the drill chuck to TTS shank, but otherwise, yes, that becomes more difficult. My BT30 spindle uses pull studs, so the pneumatic drawbar can be lifted out and a conventional drawbar can be used. This isn't as easy with a TTS as releasing the tool does not release the drawbar and the keyway stops you from just screwing the collet out from the bottom. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
