In converting my Mazak I just tied a toggle switch to the control line
for the valve that ran the hydraulics for tool release. One hand on the
switch and one on the tool. Rather crude but it worked until the
belleville stack broke.
Dave
On 11/14/21 4:02 AM, Roland Jollivet wrote:
On a BT30 spindle;
A button the front of the sindle, drawbar is depressed only as long as you
hold the button in.
On Sun, 14 Nov 2021 at 08:03, John Dammeyer <jo...@autoartisans.com> wrote:
Quick question.
On commercial machines that have buttons to load or unload the tool by
actuating the drawbar how are the buttons arranged?
Are there two? One for Load and one for Unload? Are they arranged
vertically or horizontally?
If vertically does the upper one load or unload? If horizontally does the
one on the right load or unload?
Thanks
John
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users