Pretty sure you can do this where you set the home position at homing. (So it doesn't move). The k&t homes to 38",34"',24 respectively.. it sets those positions but doesn't then move anywhere else.
On Tue, Aug 31, 2021, 2:04 AM Marius <mar...@mastercut.co.za> wrote: > > On 2021/08/31 03:25, Leonardo Marsaglia wrote: > > Hi Marius, > > > > Are you driving your A axis with steppers or servos? What are you using > as > > the physical home switch? > > > > You can always fool the homing sequence at least into some extent. I > wanted > > to use servos in open loop but that was incompatible with homing with > > index. So I bypassed the home switch for the final detection, and then > > feeded the index pulse of the servos making LCNC believe it was the home > > switch. May be you can implement something like that. > > > > El lun, 30 ago 2021 a las 9:23, Marius (<mar...@mastercut.co.za>) > escribió: > > > It uses steppers and there is no home switch. The machine was built for > Mach3 and they used a pin to lock the rotary axis in a known place. Then > they applied an offset to put the axis in the zero position. This > position was not where the pin locked the axis. My problem is that I can > apply the pin before the homing cycle starts but I cannot release it > before the offset is applied to the axis at the end of the homing cycle. > > >> Hi > >> > >> I am trying to create my own homing sequence on the A axis in Gmoccapy. > >> Is there a way to set the "homed" signal to true once I have done my > >> sequence? > >> > >> Regards > >> > >> Marius > >> > >> > >> > >> _______________________________________________ > >> Emc-users mailing list > >> Emc-users@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/emc-users > >> > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
