Pretty sure all you need to do is set your home position equal to your home offset in your ini file, then the machine will not command a move when homing is done.
Todd Zuercher P. Graham Dunn Inc. 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 -----Original Message----- From: Sam Sokolik <samco...@gmail.com> Sent: Tuesday, August 31, 2021 7:56 AM To: Enhanced Machine Controller (EMC) <emc-users@lists.sourceforge.net> Subject: Re: [Emc-users] Force homed signal [EXTERNAL EMAIL] Be sure links are safe. Pretty sure you can do this where you set the home position at homing. (So it doesn't move). The k&t homes to 38",34"',24 respectively.. it sets those positions but doesn't then move anywhere else. On Tue, Aug 31, 2021, 2:04 AM Marius <mar...@mastercut.co.za> wrote: > > On 2021/08/31 03:25, Leonardo Marsaglia wrote: > > Hi Marius, > > > > Are you driving your A axis with steppers or servos? What are you > > using > as > > the physical home switch? > > > > You can always fool the homing sequence at least into some extent. I > wanted > > to use servos in open loop but that was incompatible with homing > > with index. So I bypassed the home switch for the final detection, > > and then feeded the index pulse of the servos making LCNC believe it > > was the home switch. May be you can implement something like that. > > > > El lun, 30 ago 2021 a las 9:23, Marius (<mar...@mastercut.co.za>) > escribió: > > > It uses steppers and there is no home switch. The machine was built > for > Mach3 and they used a pin to lock the rotary axis in a known place. > Then they applied an offset to put the axis in the zero position. This > position was not where the pin locked the axis. My problem is that I > can apply the pin before the homing cycle starts but I cannot release > it before the offset is applied to the axis at the end of the homing cycle. > > >> Hi > >> > >> I am trying to create my own homing sequence on the A axis in Gmoccapy. > >> Is there a way to set the "homed" signal to true once I have done > >> my sequence? > >> > >> Regards > >> > >> Marius > >> > >> > >> > >> _______________________________________________ > >> Emc-users mailing list > >> Emc-users@lists.sourceforge.net > >> https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fl > >> ists.sourceforge.net%2Flists%2Flistinfo%2Femc-users&data=04%7C0 > >> 1%7Ctoddz%40pgrahamdunn.com%7C1a422e770e36457d34f708d96c767e86%7C57 > >> 58544c573f47cebee96c3e0806fb43%7C0%7C0%7C637660078458677921%7CUnkno > >> wn%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haW > >> wiLCJXVCI6Mn0%3D%7C1000&sdata=SSRt0i4IipADJ%2BYbn4Zrtpj1K9TEeYd > >> w0w%2Fc4RJHvm0%3D&reserved=0 > >> > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fli > > sts.sourceforge.net%2Flists%2Flistinfo%2Femc-users&data=04%7C01% > > 7Ctoddz%40pgrahamdunn.com%7C1a422e770e36457d34f708d96c767e86%7C57585 > > 44c573f47cebee96c3e0806fb43%7C0%7C0%7C637660078458677921%7CUnknown%7 > > CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJ > > XVCI6Mn0%3D%7C1000&sdata=SSRt0i4IipADJ%2BYbn4Zrtpj1K9TEeYdw0w%2F > > c4RJHvm0%3D&reserved=0 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Flist > s.sourceforge.net%2Flists%2Flistinfo%2Femc-users&data=04%7C01%7Cto > ddz%40pgrahamdunn.com%7C1a422e770e36457d34f708d96c767e86%7C5758544c573 > f47cebee96c3e0806fb43%7C0%7C0%7C637660078458677921%7CUnknown%7CTWFpbGZ > sb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3 > D%7C1000&sdata=SSRt0i4IipADJ%2BYbn4Zrtpj1K9TEeYdw0w%2Fc4RJHvm0%3D& > amp;reserved=0 > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.sourceforge.net%2Flists%2Flistinfo%2Femc-users&data=04%7C01%7Ctoddz%40pgrahamdunn.com%7C1a422e770e36457d34f708d96c767e86%7C5758544c573f47cebee96c3e0806fb43%7C0%7C0%7C637660078458677921%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=SSRt0i4IipADJ%2BYbn4Zrtpj1K9TEeYdw0w%2Fc4RJHvm0%3D&reserved=0 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
