Merci Jean-Francois
On Sat, 2022-01-29 at 10:08 +0100, jeanfrancois wrote: > Hi Valerio, > > If it may help you here's a hal+ini configuration, works fine. > > Though thi sis a few years back verison linux CNC (4-5y). > > Regards > > Jean-François > > > Le 28/01/2022 à 11:13, Valerio Bellizzomi a écrit : > > Attached are my .ini and .hal files. > > Can you tell me what is missing there? > > > > > > > > On Thu, 2022-01-27 at 12:39 -0500, gene heskett wrote: > > > On Thursday, January 27, 2022 11:49:17 AM EST Valerio Bellizzomi > > > wrote: > > > > Do I have to somehow convert my configurations for master ? > > > IDK about your axis gui errors, but one thing I note is that you > > > don't > > > have a numerical spindle number. master had grown the ability to > > > control > > > more than one spindle some time back, and the S argument now > > > expects > > > a > > > following number before the speed of the numerical assignment of > > > the > > > spindle number. All my machines only have one, they start at base > > > 0, > > > IDK > > > what the max is, so the argument for my stuff is S0 500 (or > > > whatever > > > speed you want to assign to the first spindle.) > > > > > > However I suspect something else is aglay besides that, so I'll > > > leave > > > it > > > to the experts. I did see you're on buster, but not what > > > architecture. > > > > > > Cheers, Gene Heskett. > > > > > > > > > _______________________________________________ > > > Emc-users mailing list > > > Emc-users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users