What about us protection with WEST system?Sent from my Samsung S10
-------- Original message --------From: dave engvall <dengv...@charter.net> 
Date: 2022-02-14  8:05 a.m.  (GMT-08:00) To: emc-users@lists.sourceforge.net 
Subject: Re: [Emc-users] need gcode maker I typically have gone to West Marine 
for epoxy. 5:1 mix ratio with metered pumps. Good  idea about avoiding the 
glass expander/thickener micro bubbles. :-) Fast, med and slow catalyst 
available.DaveOn 2/14/22 2:10 AM, Gregg Eshelman via Emc-users wrote:> Modern 
epoxies like the ones sold by Total Boat set up harder and don't yellow like 
the epoxies of the 1980's and earlier. An alternative to epoxies are the hard 
urethane resins, also typically made with UV protection.>> Total Boat looks 
like it's the #1 brand of epoxy used by people making those "river" tables and 
mixing all kinds of weird stuff with epoxy to turn fancy bowls on wood 
lathes.>>> On Sunday, February 13, 2022, 06:16:31 PM MST, Chris Albertson 
<albertson.ch...@gmail.com> wrote:>> It is not the epoxy that is so hard.  It 
is the filler they mix with the> epoxy.  Many times it is a kind of glass, not 
unlike what they use to make> sand paper.  Other times they mix finely ground 
bits of steel.>> I used to use a brand of epoxy that sold bottles of pure resin 
and cans of> filler.  I could mix what I needed for the job.  Sometimes I'd use 
"micro> balloon" filler these are tiny hollow balls of glass.  A gallon tub of 
them> weights about as much as an empty tub.  Mixed to a thick paste, it cures 
to> a foam you can and with a sure-form rasp.  But if you mix the same resin> 
with chopped fiberglass or chopped kevlar fiber it is as hard as stone and> 
you'd need an angle grinder to smooth it down.  I was building small boats> and 
canoes.>> Yes epoxy can be damaged by UV light.  If doing a gunstock, put 4 or 
5> coats of exterior marine varnish over it.  The marine stuff has UV blockers> 
(sunscreen) in it.>>> _______________________________________________> 
Emc-users mailing list> Emc-users@lists.sourceforge.net> 
https://lists.sourceforge.net/lists/listinfo/emc-users_______________________________________________Emc-users
 mailing 
listEmc-users@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to