Greetings all; In thinking about this vise screw project, I see a need to be able to restart where I left off if I stop it to replace a dull or broken tool. I'll have a TLO corrector at the startup of course, but it would be handy to save each new position as it progresses thru the loop, marking where it starts this pass, and AFTER doing the tlo corrections, I could re-read that last loop yz value and restore the working values so it could start the next iteration at that point.
So, is there an mcode or similar that I could put in my program to save the current position it has attained, stop it and change to a fresh tool, and then restore to that same point with a fresh tool? Thanks all. Cheers, Gene Heskett. -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author, 1940) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
