On Fri, 30 Sep 2022, John Dammeyer wrote:
Date: Fri, 30 Sep 2022 13:40:57 -0700
From: John Dammeyer <jo...@autoartisans.com>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: "'Enhanced Machine Controller (EMC)'" <emc-users@lists.sourceforge.net>
Subject: Re: [Emc-users] Linuxcnc configurations using Mesa
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
If you get read errors on a RPI4 and 7I76E, I would double the servo
thread period (the RPI4 is marginal at a 1 KHz servo thread period with
some kernels)
Peter Wallace
Mesa Electronics
So you'd change it to 500Hz or 2kHz?
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
2 ms or the equivalent 500 Hz
Also check tha you have isolcpus 1,2,3 on a RPI4
Peter Wallace
Mesa Electronics
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
