> >> > >> If you get read errors on a RPI4 and 7I76E, I would double the servo > >> thread period (the RPI4 is marginal at a 1 KHz servo thread period with > >> some kernels) > >> > >> > >> Peter Wallace > >> Mesa Electronics > > > > So you'd change it to 500Hz or 2kHz? > > > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > Also forgot to add, you need force_turbo=1 in config.txt > > Peter Wallace > Mesa Electronics >
Thanks. I find when I play with my Rpi4 and 7i92H that when I first start up I get the message that something is too slow. It's all stored in a box at the moment and I don't have room on the bench to check this but I'll make a note the next time it's allowed out for some exercise. John Dammeyer _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users