Flood coolant, air blowing, or vacuum. Or pre-drill a bunch of holes to almost finished depth to remove the majority of the waste before milling.
On Wednesday, November 30, 2022 at 10:08:49 AM MST, Nicklas SB Karlsson <n...@nksb.eu> wrote: Milling a deep pocket spiral down work great first turn but after a while torque is not enough and mill stop. Suspect it is because mill have to cut old chips in addition to machining part. Maybe it is a good idea to use drill bit a little bit smaller than slot? Nicklas Karlsson _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
