Adapter plate sounds easiest to me On Sun, 25 Jun 2023, 21:01 andy pugh, <bodge...@gmail.com> wrote:
> On Sun, 25 Jun 2023 at 04:31, John Dammeyer <jo...@autoartisans.com> > wrote: > > > Is there any reason I can't clamp the motor in a vice and pop in two > holes > > and tap them with a bottom tap at the spacing of the mounting flange? > > I have done it in-situ, but there really isn't all that much metal in > there. > > I think pulling the back cover off (leaving the rotor in place) and > choosing your mounting point carefully would probably be best. > > Or, as Gene says, use the existing holes, very short screws, and an > adaptor plate. > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users