On 6/25/23 04:59, andy pugh wrote:
On Sun, 25 Jun 2023 at 04:31, John Dammeyer <jo...@autoartisans.com> wrote:
Is there any reason I can't clamp the motor in a vice and pop in two holes
and tap them with a bottom tap at the spacing of the mounting flange?
I have done it in-situ, but there really isn't all that much metal in there.
I think pulling the back cover off (leaving the rotor in place) and
choosing your mounting point carefully would probably be best.
Or, as Gene says, use the existing holes, very short screws, and an
adaptor plate.
The advantage there is that on your test assembly, you'll likely find
something that needs changed to make it fit really well, and the
OpenSCAD edit of one or two vars, thru cura and feeding the gcode from
cura to the printer for a corrected copy is a 5 minute job. During which
time you can take a nap or do other productive work. At my age, the nap
often wins. ;o)> Keeps me out of the bars too dontcha know.
Tace care and stay well all.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/>
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
