Sorry, I hit the send button to early on my iphone...by mistake. Forgot to mention, Inventory Manager Scripts only work via the SSH protocol, not via telnet like the "Execute command script" tool in NetSight.
You must configure the right CLI credentials for your Cisco/Foundry devices under Tools->Authorization/Device Access-> Profiles/Credentials. Use SSH for you CLI credentials and bind it to your SNMP profile with which you poll your Cisco and/or Foundry devices. Now the Inventory Manager should be able to login to your C/F devices and execute the config/firmware upload/download scripts/wizards, also the reset wizard should work. Hope this helps. Cheers, Markus Sent via iPhone. On 16.02.2011, at 00:14, "Kaiser, Markus" <[email protected]> wrote: > Hi Richard, > > For Cisco (and also HP and Extreme) everything is already predefined in > NetSight, if you use late 3.3.x.xx or already 4.0.0.xx version of NetSight. > > Go to Inventory Manager, select a Cisco device in network view and click in > the second tab "Image Information" on the right side. There you will find a > section "MIB and Script Overrides". > > Select "Script" from the pull down menu for both, "Firmware Download MIB" and > "Configuration MIB". > Then select "Cisco Systems -TFTP" from the pull down menu "Device Family > Definition File Name". > > You are all set now, use the wizards for your just configured Cisco device. > Configure each other device the same way. > > If the Foundry devices are using same CLI syntax for Configuration/Firmware > uploads/downloads, you can use Cisco settings. Otherwise you need to > configure your own script for Foundry, basically simple. > > NetSight has a very good (online) help. > For this case click on Help->Help Topics and look for Inventory Manager > section, there for "How to's" and then for Third Party Integration. There it > is described, how to write your own vendor scripts. > > Works perfect, did it already for ten other network vendors. > > If you experience any problems, don't hesitate to write. > > > > > Sent via iPhone. > > On 15.02.2011, at 15:18, "Richard Hart" <[email protected]<mailto:[email protected]>> > wrote: > > All, > Has anyone successfully used Inventory Manager to backup configurations for > Non-Enterasys equipment such as Cisco switches/routers and/or Foundry > switches? > I have added the Mibs for both of these vendors but have not been able to use > Inventory Manager or any other part of Netsight to backup configs for these > devices. > > Thanks, > Richard > > Richard Hart > Telecommunications Engineer > Tidewater Community College > > ________________________________ > CONFIDENTIALITY NOTICE: This email message, including any attachments, is for > the sole use of the intended recipient(s) and may contain confidential and > privileged information or otherwise be protected by law. Any access, use, > disclosure or distribution of this email message by anyone other than the > intended recipient(s) is unauthorized and prohibited. If you are not an > intended recipient (or an agent acting on an intended recipient's behalf), > please contact the sender by reply email and immediately destroy all copies > of the original message. Virus scanning is recommended on all email > attachments. > > * --To unsubscribe from enterasys, send email to <mailto:[email protected]> > [email protected]<mailto:[email protected]> with the body: unsubscribe > enterasys [email protected]<mailto:[email protected]> --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
