Has anyone had success using Symantec Ghost to re-image hard drives across the network utilizing multicast. The process will run for a period of time and then hang or fail. On a standalone C2G124-48, it will usually get to 15% and then hang. Looking for advice from anyone who has managed to get this process working properly.
Our configuration is very simple: S4 at the core with the following commands: Set igmp enable xxxx,xxxx,xxxx, etc Set igmp query-enable xxxx,xxxx,xxxx etc Routing is handled on the S4 E1 at building edge with following commands: Set igmp enable Set igmp query-interval 60 Set igmp response-time 120 Set igmp mode vlan xxxx Set igmp mode ip address 10.10.1.253 (unused IP address) G3’s connected to E1’s Set igmpsnooping interfacemode ge.*.* enable Set igmpsnooping adminmode enable Set igmpsnooping groupmembershipinterval 60 Set igmpsnooping maxresponse 120 Regards, Sean --- Sean M. Sheil, GSEC Sr. Systems Administrator Northwest Missouri State University 660.541.3021 Northwest WILL NOT ask for your username/password information via e-mail. --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
