----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----David; I have a set of wheel pants for an Ercoupe/Alon, and I have purchased hardware for the mounting. They were mounted with a bolt through the axle with spacers to give wheel clearance. Alignment with the wing bottom surface was handled with a brace that attached to a bracket on the upper gear leg and a bolt put through the top rear of the wheel pant. After installation, one was supposed to adjust the bracket as required to try to maintain the wheel pant in an approximately parallel position with the ground/bottom of the wing.
I am located in Frostproof, FL, but we can make arrangements for you to borrow one or more of these components as necessary, or as you desire, whatever the case may be. Feel free to contact me at 863 635 7916.
Lynn Nelsen
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers/
