John Carmack wrote: > Note that your A/D is probably sampling faster than the sensor bandwidth, > which is usually 100hz or less for DC reading (non-vibration) > accelerometers, so aliasing is not likely the problem. I would suspect > flexing structure, unless you are using one of the really cheap unbalanced > accelerometers, which might have internal vibration issues.
Sampling system on the KISS flights was "RDAS" recording altimeter/accelerometer, 200 Hz sample rate. Acceleration was recorded by onboard ADXL150 accelerometer chip; I don't have the data sheets for it here but I can look them up in the next day or so. -dave w _______________________________________________ ERPS-list mailing list [EMAIL PROTECTED] http://lists.erps.org/mailman/listinfo/erps-list