On Wed, 20 Jul 2011 11:17:34 -0500 "Jeff Krasky" <jeff.kra...@dspcg.com> wrote:
> > Please check the output of dmesg when you start the master via init > > script (/etc/init.d/ethercat start) > > I'll paste the entire output at the bottom, but here I will paste > what looks to be relevant. I see this: > > ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 18 (level, low) -> IRQ 66 > eth0: RealTek RTL-8029 found at 0x1000, IRQ 66, 00:50:BA:54:8A:69. > hw_random: RNG not detected > eth0 renamed to eth1 > ... > ... > ... > ec_master: module not supported by Novell, setting U taint flag. > EtherCAT: Master driver devel unknown > EtherCAT: 1 master waiting for devices. > IA-32 Microcode Update Driver: v1.14 <tig...@veritas.com> > ec_8139too: module not supported by Novell, setting U taint flag. > ec_8139too EtherCAT-capable Fast Ethernet driver 0.9.27, master devel > unknown > IA-32 Microcode Update Driver v1.14 unregistered > > > One question: Why do you use such an old kernel? > > I know running system with our stack starting at 2.6.13, but I do > > not see a driver for 2.6.16, maybe there is a driver problem? > Hi There are built versions here for openSUSE 11.3, 11.4 and SLE 10 (which is your kernel version 2.6.16). http://software.opensuse.org/search?q=ethercat&baseproject=ALL&lang=en&include_home=true&exclude_debug=true The 2.6.16 one was patched by me for the SLE 10 rpm... -- Cheers Malcolm °¿° (Linux Counter #276890) openSUSE 11.4 (x86_64) Kernel 2.6.37.6-0.5-desktop up 10 days 10:49, 3 users, load average: 0.21, 0.19, 0.13 GPU GeForce 8600 GTS Silent - Driver Version: 270.41.19 _______________________________________________ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users