> Try this: > > ./configure --prefix=/home/user1/buildroot-2011.05/output/target/opt \
> --with-linux-dir=/home/user1/buildroot-2011.05/output/build/linux-2.6.33 \ > --enable-generic --host=arm-unknown-linux-uclibcgnueabi- Here is the latest output: user1@dhcppc15:~/Desktop/EtherCAT4Atmel/etherlabmaster-4adb56c4198d> ./configure --prefix=/home/user1/buildroot-2011.05/output/target/opt --with-linux-dir=/home/user1/buildroot-2011.05/output/build/linux-2.6.33 --enable-generic --host=arm-unknown-linux-uclibcgnueabi- configure: WARNING: if you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-unknown-linux-uclibcgnueabi--strip... no checking for strip... strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for arm-unknown-linux-uclibcgnueabi--g++... no checking for arm-unknown-linux-uclibcgnueabi--c++... no checking for arm-unknown-linux-uclibcgnueabi--gpp... no checking for arm-unknown-linux-uclibcgnueabi--aCC... no checking for arm-unknown-linux-uclibcgnueabi--CC... no checking for arm-unknown-linux-uclibcgnueabi--cxx... no checking for arm-unknown-linux-uclibcgnueabi--cc++... no checking for arm-unknown-linux-uclibcgnueabi--cl.exe... no checking for arm-unknown-linux-uclibcgnueabi--FCC... no checking for arm-unknown-linux-uclibcgnueabi--KCC... no checking for arm-unknown-linux-uclibcgnueabi--RCC... no checking for arm-unknown-linux-uclibcgnueabi--xlC_r... no checking for arm-unknown-linux-uclibcgnueabi--xlC... no checking for g++... g++ checking whether the C++ compiler works... yes checking for C++ compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for style of include used by make... GNU checking dependency style of g++... gcc3 checking build system type... i686-suse-linux-gnu checking host system type... Invalid configuration `arm-unknown-linux-uclibcgnueabi-': machine `arm-unknown-linux-uclibcgnueabi' not recognized configure: error: /bin/sh autoconf/config.sub arm-unknown-linux-uclibcgnueabi- failed user1@dhcppc15:~/Desktop/EtherCAT4Atmel/etherlabmaster-4adb56c4198d> I then did this to show that the compiler is at least in the PATH: user1@dhcppc15:~/Desktop/EtherCAT4Atmel/etherlabmaster-4adb56c4198d> arm-unknown-linux-uclibcgnueabi-gcc arm-unknown-linux-uclibcgnueabi-gcc: no input files user1@dhcppc15:~/Desktop/EtherCAT4Atmel/etherlabmaster-4adb56c4198d> Does EtherCAT not like the compiler I am pointing it to? That compiler, as far as I know, was what compiled the entire Linux kernel and file system, so it should be good enough, right? Thanks again, Jeff
_______________________________________________ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users