Hi,
I set up the latest stable EtherLab EtherCAT Master (branch stable-1.5
from Mercurial-Repository) on my Lenovo X250 Laptop (one Intel I218-LM
NIC) with Debian installed (3.2.0-4-rt-amd64 #1 SMP PREEMPT RT Debian
3.2.89-2 x86_64). When I try to use the compiled ec_e1000e kernel module
(./configure --enable-e1000e; not compiled into the kernel - kernel
config set is =M) the EtherCAT Master will not find my NIC and stucks on
the dmesg message:
EtherCAT: 1 master waiting for devices.
ec_e1000e: Ethercat-capable Intel(R) PRO/1000 Network Driver -
1.5.1-k-EtherCAT
When I use the generic driver everything works fine and the Master find
my NIC. /etc/sysconfig/ethercat is configured with the right MAC address
of my NIC.
I'm not sure if the I218-LM NIC is supported, but in this post it seems
that it is
(http://lists.etherlab.org/pipermail/etherlab-dev/2016/000554.html).
Does anyone have an idea?
Thank you for your help,
Benjamin.
--
Dipl.-Ing. Benjamin Neef
Technische Universität Braunschweig
Institut für Werkzeugmaschinen und Fertigungstechnik (IWF)
Nachhaltige Produktion & Life-Cycle-Engineering
Langer Kamp 19b
38106 Braunschweig
Tel.: +49 (0) 531 391 8751
Fax: +49 (0) 531 391 5842
Internet:https://www.tu-braunschweig.de/iwf/pul
_______________________________________________
etherlab-users mailing list
etherlab-users@etherlab.org
http://lists.etherlab.org/mailman/listinfo/etherlab-users
