Thanks for your reply!
When ethercat is started with the generic driver (/etc/init.d/ethercat
start) lspci -k says "Kernel driver in use: e1000e".
I will wait for the igb driver.
Am 18.09.2017 um 08:40 schrieb Dr.-Ing. Wilhelm Hagemeister:
The igb driver is being worked on and it will be released in the next
couple of weeks.
Am 18.09.2017 um 01:42 schrieb Gavin Lambert:
I don’t know whether this applies to that specific card or not, but some
of the newer gigabit cards require the igb driver rather than the e1000e
driver, and that hasn’t been patched for EtherCAT yet.
_______________________________________________
etherlab-users mailing list
etherlab-users@etherlab.org
http://lists.etherlab.org/mailman/listinfo/etherlab-users
--
Dipl.-Ing. Benjamin Neef
Technische Universität Braunschweig
Institut für Werkzeugmaschinen und Fertigungstechnik (IWF)
Nachhaltige Produktion & Life-Cycle-Engineering
Langer Kamp 19b
38106 Braunschweig
Tel.: +49 (0) 531 391 8751
Fax: +49 (0) 531 391 5842
E-Mail: b.n...@tu-bs.de
Internet: https://www.tu-braunschweig.de/iwf/pul
_______________________________________________
etherlab-users mailing list
etherlab-users@etherlab.org
http://lists.etherlab.org/mailman/listinfo/etherlab-users
