Hi Howard,
With objectname
Only takes effect in specific instances of using a leading ".". Nothing
else in the with block is effected. It's an "anonymous" (no variable name)
equivalent to:
Set MyObject = objectname
'and then placing MyObject before each of those naked periods you
would have used in the With block.
Some tips on debugging can be found at these links:
Some basics:
http://www.computing.net/howtos/show/debugging-vba-code-101-a-tutorial/720.h
tml
http://www.ozgrid.com/Excel/free-training/ExcelVBA1/excelvba1lesson17.htm
me answering some debugging questions:
http://chandoo.org/forums/topic/debugging-custom-vba-function
Mainly read the "Debugger" section and the sections that follow here:
http://msdn.microsoft.com/en-us/library/ee358847.aspx
Read the "Debug Menu" topics in Help
> contangoindex = WorksheetFunction.Match(Sheets(RawData).Cells(2,
> BarDate).Value, Sheets(ContangoSource).Columns(ConDate), 0)
>
> and the excel equivalent to this just from the spreadsheet
> =MATCH(A2,ContangoSource!A:A)
> returns the correct value
When code execution stops at the problem line, analyze each parameter
carefully.
E.g.: What is the value of BarDate at that point? It might not be what you
expect, and the fault in your code could be elsewhere. For it to match the
function you described using on in a sheet cell, Bardate would have to refer
to column A, so it would have to be the number 1. If it's not, that's a
problem
Examine each component of the failing statement. To do so from the Immediate
pane, you might try to answer the following questions (you can also use the
Locals and Watch panes, among other methods):
Is BarDate 1 ?
Is RawData set to the name of the RawData sheet?
Is TypeName(Sheets(RawData)) "Worksheet" ?
or
Is Sheets(RawData).Name = RawData ? (actually it either will be or the
object will not be valid at all)
Is TypeName(Sheets(RawData).Cells(2, BarDate)) "Range"?
or
Is Sheets(RawData).Cells(2, BarDate).Address "$A$2"?
Is Sheets(RawData).Cells(2, BarDate).Value what you expect?
etc.
These are the questions you ask once you double check the basic syntax of a
line. Break down all your assumptions. You will most likely find something
is not what you expect. When you do, backtrack to see how that happened.
One way besides a syntactical bug in your code is that the name of a sheet
isn't exactly what you think it is, or the value of a cell isn't exactly
what you think it is (or even what it looks to be). There is the occasional
VBA bug, too, that sometimes require workarounds, but that is the rare
exception.
Asa
-----Original Message-----
From: excel-macros@googlegroups.com [mailto:excel-macros@googlegroups.com]
On Behalf Of Domain Admin
Sent: Saturday, April 07, 2012 6:29 PM
To: excel-macros@googlegroups.com
Subject: Re: $$Excel-Macros$$ Why is usedrange here returning the entire
spreadsheet?
I notice in all the other match functions they are inside a
With Sheets(somesheet)
so I tried putting sheets(rawdata).worksheetfunction ...
but still failed though I did not expect it to work since the match
function is trying to work across sheets. I hoped it might since
maybe it just needed some way to find the match function. Is this
whole concept of the single match function flawed even though I
could make the equivalent excel function work? I had the match
reversed. Code should be
startrawdata = 2
stoprawdata = Sheets(RawData).UsedRange.Rows.Count 'end of the
RawData columns
' Determine where the index in ContangSource is of the first date
that matches the first date in RawData
contangoindex = WorksheetFunction.Match(Sheets(RawData).Cells(2,
BarDate).Value, Sheets(ContangoSource).Columns(ConDate), 0)
and the excel equivalent to this just from the spreadsheet
=MATCH(A2,ContangoSource!A:A)
returns the correct value
On Sat, Apr 7, 2012 at 5:50 PM, Domain Admin <domainqu...@gmail.com> wrote:
> Well the usedrange problem is solved. I printed out just the cell
> count of the used range and it indicated there was a column with data
> somehow even though invisible.
> So I deleted the column and that reduced the number. So I thought
> there must still somehow be data in the "empty" rows so I did another
> delete the same as before but now the number of rows is correct.
> Scary since I do not know why the second time deleted it or what was
> there before. I will need to put in some check for invalid data past
> the end of the valid data though I think all that would happen is it
> would run real slow.
>
> For this statement
>
> startrawdata =
> WorksheetFunction.Match(Sheets(ContangoSource).Cells(2,
> ConDate).Value, Sheets(RawData).Columns(BarDate), 0)
>
> I determined Sheets(RawData).Columns(BarDate) is returning the correct
> entire column as the range. I also determined
> Sheets(ContangoSource).Cells(2, ConDate).Value is returning the
> expected value so the error message of
> Unable to find the match property of the worksheetfunction class
> seems to say some misuse of the object hierarchy to me but I do not
> see it. I can make what I think is the equivalent pure excel
> function return the correct answer just plugging it into the
> spreadsheet.
>
> On Sat, Apr 7, 2012 at 5:17 PM, Domain Admin <domainqu...@gmail.com>
wrote:
>> I read that after I posted. But doesn't that mean
>>
>> Sheets(Results).Cells.Resize(-1).Offset(1).Delete
>>
>> that you suggested would be deleting ever row in the sheet except the
>> header and not just the used range?
>>
>> In any case I am still screwed on this returning 1000000
>> stoprawdata = Sheets(RawData).UsedRange.Rows.Count
>>
>> and this not working at all
>>
>> startrawdata =
>> WorksheetFunction.Match(Sheets(ContangoSource).Cells(2,
>> ConDate).Value, Sheets(RawData).Columns(BarDate), 0)
>>
>> If you want to keep helping I am glad to have it because I am
>> basically trying pseudo random things to debug and so far have only
>> solved one of the 3 problems today myself.
>>
>> On Sat, Apr 7, 2012 at 5:09 PM, Asa Rossoff <a...@lovetour.info> wrote:
>>> On Worksheet.Cells, Help says: "Returns a Range object that represents
all
>>> the cells on the worksheet (not just the cells that are currently in
use."
>>>
>>> For info on range references check "How to: Reference Cells and Ranges"
in
>>> VBA Help.
>>> However, basically in this case what you are noticing is the notation
for
>>> entire rows and columns.
>>> A large range of cells: A1:Z1048576
>>> A range of entire columns: A:Z
>>> A range of entire rows: 1:1048576
>>>
>>> The latter naturally, with the definition of .Cells at hand, is the
entire
>>> worksheet. It could also be described in terms of columns: A:XFD
>>> Or in terms of cells: A1:XFD1048576
>>>
>>> Asa
>>>
>>> -----Original Message-----
>>> From: excel-macros@googlegroups.com
[mailto:excel-macros@googlegroups.com]
>>> On Behalf Of Domain Admin
>>> Sent: Saturday, April 07, 2012 5:00 PM
>>> To: excel-macros@googlegroups.com
>>> Subject: Re: $$Excel-Macros$$ Why is usedrange here returning the entire
>>> spreadsheet?
>>>
>>> using Debug.Print ActiveSheet.Cells.Address returns $1:$1048576
>>> which makes me think is is the true number of rows but
>>> would seem to address only 1 column so I guess I am reading it wrong?
>>> I thought cells and usedrange were pretty much equivalent but
>>> apparently not.
>>>
>>> On Sat, Apr 7, 2012 at 4:51 PM, Domain Admin <domainqu...@gmail.com>
wrote:
>>>> Writing that book should be easy. Just collect all your question and
>>>> answer thread and put them in a book.
>>>>
>>>> I do have Option Explicit
>>>>
>>>> The current usedrange does seem to return the correct range looking at
>>>> the address so
>>>> that clearcontents should work but the resize concept seems good.
>>>>
>>>> I read somewhere to use double for the indexes but that is just a
>>>> larger long so either way
>>>> I should be covered. Using double now may just waste a few bytes?
>>>>
>>>> Debug.Print Sheets(RawData).UsedRange.Address returns $A$1:$I$1000000
>>>> but doing it on the results page returns correct range
>>>>
>>>> Trying your change match statement
>>>> startrawdata = WorksheetFunction.Match(Sheets(ContangoSource).Cells(2,
>>>> ConDate).Value, Sheets(RawData).Columns(BarDate), 0)
>>>>
>>>> gave Unable to get the match property of the worksheetfunction class
>>>>
>>>> On Sat, Apr 7, 2012 at 4:19 PM, Asa Rossoff <a...@lovetour.info> wrote:
>>>>> The term reference in Excel, when referring to a cell or range, means
the
>>>>> textual description of that cell or range (the Address property of a
>>> range
>>>>> object returns the range reference). In VBA and other object oriented
>>>>> languages, reference also refers to variables that refer to an object,
>>> but
>>>>> that's a whole nother topic. In any case, the word has a special
>>> meaning,
>>>>> so I'm glad you posted more of your code to clarify what you meant :)
>>>>>
>>>>> (1) Make sure OPTION EXPLICIT is the first line in your module, it
will
>>>>> alert you if VBA thinks you didn't declare a variable (i.e. you
misspell
>>> a
>>>>> variable name or other keyword somewhere)
>>>>> (2) In InitRefs() I would use (to ensure UsedRange will be updated):
>>>>> Sheets(Results).UsedRange.ENTIREROW.Offset(1).DELETE ' delete
results
>>>>> from previous run
>>>>> OR, likely a hair faster:
>>>>> Sheets(Results).Cells.Resize(-1).Offset(1).Delete ' delete results
>>> from
>>>>> previous run
>>>>> (3) All variables storing row or column indexes should be Long. In
>>>>> LoadContangoSource() try using these declares:
>>>>> dim contangoindex As Long
>>>>> Dim startrawdata As Long
>>>>> Dim stoprawdata As Long
>>>>> Dim index As Long
>>>>> In your global declares:
>>>>> Public BarDate As Long
>>>>> Public ConDate As Long
>>>>> Public Contango As Long
>>>>> Public EContango As Long '(I assume this is a row/column index)
>>>>> (4) In Your problem line, you need to specifiy a range object to match
>>> in.
>>>>> You are trying to use a variable holding an integer value as a
property
>>> of a
>>>>> worksheet, and also expecting it to return a range object when you do
so.
>>>>> This should work, though it will search the header row and potentially
>>> the
>>>>> unused range (a reason to use range variables and define the exact
range
>>>>> needed in advance since it is time consuming to create range objects
>>>>> repeatedly):
>>>>> startrawdata =
>>>>> WorksheetFunction.Match(Sheets(ContangoSource).Cells(2,
>>>>> ConDate).Value, Sheets(RawData).Columns(BarDate), 0)
>>>>> (5) In your rawdata loop, there is no need for parenthesis around the
>>>>> boolean expression. VBA will always evaluate the entire expression
>>> between
>>>>> If/Then separately from the rest of the If/Then statement. I haven't
>>>>> analyzed your loop too closely, but you can consider if you could use
>>>>> Range.Find or WorksheetFunction.Match instead of looping through the
>>> whole
>>>>> range. If that would result in fewer iterations it could be
>>> significantly
>>>>> faster.
>>>>>
>>>>> Asa
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: excel-macros@googlegroups.com
>>> [mailto:excel-macros@googlegroups.com]
>>>>> On Behalf Of Domain Admin
>>>>> Sent: Saturday, April 07, 2012 3:32 PM
>>>>> To: excel-macros@googlegroups.com
>>>>> Subject: Re: $$Excel-Macros$$ Why is usedrange here returning the
entire
>>>>> spreadsheet?
>>>>>
>>>>> No not a range object, just a reference. But here is the entire
>>>>> program. I removed the currently unused portions and ignore Public
>>>>> just have not bothered to change that yet.
>>>>>
>>>>> ' Column reference objects
>>>>> Public BarDate As Double
>>>>>
>>>>> Public ConDate As Double
>>>>> Public Contango As Long
>>>>> Public EContango As Double 'the expanded set of contango values
>>>>> to cover all time periods
>>>>>
>>>>> ' Sheet names and pointers
>>>>> Const RawData As String = "RawData"
>>>>> Const Results As String = "Results"
>>>>> Const ContangoSource As String = "ContangoSource"
>>>>>
>>>>>
>>>>>
>>>>> Sub InitRefs()
>>>>> '
>>>>> ' Sub which sets the data column names and misc values for the RawData
>>> sheet
>>>>> '
>>>>> With Sheets(RawData)
>>>>> BarDate = WorksheetFunction.Match("BarDate", .Rows(1), 0)
>>>>> End With
>>>>> With Sheets(ContangoSource)
>>>>> ConDate = WorksheetFunction.Match("ConDate", .Rows(1), 0)
>>>>> Contango = WorksheetFunction.Match("Contango", .Rows(1), 0)
>>>>> End With
>>>>>
>>>>> Sheets(Results).UsedRange.Offset(1).ClearContents ' clear out
>>>>> results from previous run
>>>>>
>>>>> End Sub
>>>>> Sub LoadContangoSource()
>>>>>
>>>>> ' Sub which takes the data from the ContangoSource sheet which is
per
>>> day
>>>>> and
>>>>> ' copies it to the RawData sheet with entries for each of the bars.
>>>>>
>>>>> Dim contangoindex As Integer
>>>>> Dim startrawdata As Double
>>>>> Dim stoprawdata As Double
>>>>> Dim index As Integer
>>>>>
>>>>> contangoindex = 2
>>>>> stoprawdata = Sheets(RawData).UsedRange.Rows.Count 'end of the
>>>>> RawData columns THE LINE THAT RETURNS 999999
>>>>> ' Determine where the index in ContangSource is of the first date
>>>>> that matches the first date in RawData
>>>>> startrawdata =
>>>>> WorksheetFunction.Match(Sheets(ContangoSource).Cells(2,
>>>>> ConDate).Value, Sheets(RawData).BarDate, 0) THE FAILING MATCH
>>>>>
>>>>> ' Now loop through the RawData entries copying the contango value as
>>>>> many times as needed for the matching dates in RawData.
>>>>> ' Since RawData can be from charts with any interval there may be
>>>>> many entries for each matching ContangoSource date.
>>>>> For index = startrawdata To stoprawdata
>>>>> If (Sheets(RawData).Cells(index, BarDate).Value =
>>>>> Sheets(ContangoSource).Cells(contangoindex, ConDate).Value) Then
>>>>> Sheets(RawData).Cells(index, EContango).Value =
>>>>> Sheets(ContangoSource).Cells(contangoindex, Contango).Value
>>>>> Else
>>>>> contangoindex = contangoindex + 1
>>>>> End If
>>>>> Next index
>>>>>
>>>>> End Sub
>>>>>
>>>>> On Sat, Apr 7, 2012 at 3:22 PM, Asa Rossoff <a...@lovetour.info> wrote:
>>>>>> "bardate is a column" do you mean it's a range object?
>>>>>> then instead of
>>>>>> Sheets(RawData).BarDate
>>>>>> just use:
>>>>>> BarDate
>>>>>>
>>>>>> For more help pleas post whole procedure
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: excel-macros@googlegroups.com
>>> [mailto:excel-macros@googlegroups.com]
>>>>>> On Behalf Of Domain Admin
>>>>>> Sent: Saturday, April 07, 2012 3:14 PM
>>>>>> To: excel-macros@googlegroups.com
>>>>>> Subject: Re: $$Excel-Macros$$ Why is usedrange here returning the
entire
>>>>>> spreadsheet?
>>>>>>
>>>>>> I figured the extra row was cleared but that is not a problem.
>>>>>> It seems on testing that clearcontents is working fine leaving the
>>>>>> formats alone, It appears that delete is also leaving the formats
>>>>>> alone. But this still leaves me with 2 problems
>>>>>>
>>>>>> 1. why does usedrange seem to be returning the entire row count for
>>>>>> the spreadsheet?
>>>>>> 2. Why does this statement return Object does not support this
>>>>>> property or method
>>>>>>
>>>>>> startrawdata =
>>>>>> WorksheetFunction.Match(Sheets(ContangoSource).Cells(2,
>>>>>> ConDate).Value, Sheets(RawData).BarDate, 0)
>>>>>> where Condate is a column and BarDate is a column and hopefully
>>>>>> Sheets(RawData).BarDate returns that column as the range for the
>>>>>> Match.
>>>>>>
>>>>>>
>>>>>> On Sat, Apr 7, 2012 at 2:53 PM, Asa Rossoff <a...@lovetour.info>
wrote:
>>>>>>> not well documented but entire row and column formats are only
stored
>>>>> once
>>>>>>> in your file and do not effect usedrange.
>>>>>>> Yeah, your efficient statement will clear the used range of the
>>>>>> spreadsheet
>>>>>>> except for the first row. it will also clear the next row down from
>>> the
>>>>>>> used range (which was already clear). Not to mention, even if you
had
>>>>>>> specified the correct range, ClearContents is like the delete key -
it
>>>>>>> clears the text and formulas. Clearing is not the same as deleting.
>>>>>>>
>>>>>>> If you have a table of data that is the only significant data on the
>>>>>> sheet,
>>>>>>> this will delete other rows/columns, I beliewve - untested - save
first
>>>>>>> (although, syou probably don't need to code this; this situation
does
>>> not
>>>>>>> arise if you delete rows that are no longer needed as a matter of
habit
>>>>>>> rather than clearing them):
>>>>>>> with activesheet
>>>>>>> set r=.range("a1").currentregion
>>>>>>> .Cells.Resize(-r.rows.count).offset(r.rows.count).delete
>>>>>>> .cells.resize(0,-r.columns.count).offset(r.columns.count).delete
>>>>>>> end with
>>>>>>>
>>>>>>> Asa
>>>>>>>
>>>>>>> -----Original Message-----
>>>>>>> From: excel-macros@googlegroups.com
>>>>> [mailto:excel-macros@googlegroups.com]
>>>>>>> On Behalf Of Domain Admin
>>>>>>> Sent: Saturday, April 07, 2012 2:40 PM
>>>>>>> To: excel-macros@googlegroups.com
>>>>>>> Subject: Re: $$Excel-Macros$$ Why is usedrange here returning the
>>> entire
>>>>>>> spreadsheet?
>>>>>>>
>>>>>>> Ok then I can not use this method at all becaues the columns have
>>>>>>> formats set for the entire column (really not efficient for that to
be
>>>>>>> part of userange).
>>>>>>> And I am guessing this statement that I thought was efficient is
>>>>>>> actually clearing the entire spreadsheet and not jus the part with
>>>>>>> data (except the header row)?
>>>>>>>
>>>>>>> Sheets(Results).UsedRange.Offset(1).ClearContents
>>>>>>>
>>>>>>> Best alternative for finding the last row of data in a spreadsheet?
>>>>>>>
>>>>>>> And this statement is returning Object does not support this
property
>>>>>>> or method. I was pretty sure it would not work but worth a shot.
>>>>>>>
>>>>>>> startrawdata =
>>>>>>> WorksheetFunction.Match(Sheets(ContangoSource).Cells(2,
>>>>>>> ConDate).Value, Sheets(RawData).BarDate, 0)
>>>>>>>
>>>>>>> is the problem that worksheetfunction needs a particular sheet?
>>>>>>> ConDate and BarDate are column names and this concept seems to work
>>>>>>> elsewhere
>>>>>>> but not sure if Sheets(RawData).Bardate really returns that column
as a
>>>>>>> range?
>>>>>>>
>>>>>>> On Sat, Apr 7, 2012 at 2:30 PM, Asa Rossoff <a...@lovetour.info>
wrote:
>>>>>>>> you should highlight the entire rows (and same for extra columns),
>>>>>>>> right-click, delete
>>>>>>>>
>>>>>>>> the delete key won't cut it (clears the text and formulas but
leaves
>>>>>>>> formats)
>>>>>>>>
>>>>>>>> or I select those rows/columns, then Alt-E,D
>>>>>>>>
>>>>>>>> if selecting some cells but not entire row/column, you can delete
>>> entire
>>>>>>> row
>>>>>>>> with Alt-E,D,R and entire column with Alt-E,D,C
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> From: excel-macros@googlegroups.com
>>>>>> [mailto:excel-macros@googlegroups.com]
>>>>>>>> On Behalf Of tangledweb
>>>>>>>> Sent: Saturday, April 07, 2012 2:25 PM
>>>>>>>> To: excel-macros@googlegroups.com
>>>>>>>> Subject: $$Excel-Macros$$ Why is usedrange here returning the
entire
>>>>>>>> spreadsheet?
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> This statement is returning 999999 though I deleted everthing
below
>>> the
>>>>>>>> actual data to make sure no cells below it were used
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> stoprawdata = Sheets(RawData).UsedRange.Rows.Count - 1
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> FORUM RULES (986+ members already BANNED for violation)
>>>>>>>>
>>>>>>>> 1) Use concise, accurate thread titles. Poor thread titles, like
>>> Please
>>>>>>>> Help, Urgent, Need Help, Formula Problem, Code Problem, and Need
>>> Advice
>>>>>>> will
>>>>>>>> not get quick attention or may not be answered.
>>>>>>>>
>>>>>>>> 2) Don't post a question in the thread of another member.
>>>>>>>>
>>>>>>>> 3) Don't post questions regarding breaking or bypassing any
security
>>>>>>>> measure.
>>>>>>>>
>>>>>>>> 4) Acknowledge the responses you receive, good or bad.
>>>>>>>>
>>>>>>>> 5) Cross-promotion of, or links to, forums competitive to this
forum
>>> in
>>>>>>>> signatures are prohibited.
>>>>>>>>
>>>>>>>> NOTE : Don't ever post personal or confidential data in a workbook.
>>>>> Forum
>>>>>>>> owners and members are not responsible for any loss.
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>
----------------------------------------------------------------------------
>>>>>>> --------------------------
>>>>>>>> To post to this group, send email to excel-macros@googlegroups.com
>>>>>>>>
>>>>>>>> --
>>>>>>>> FORUM RULES (986+ members already BANNED for violation)
>>>>>>>>
>>>>>>>> 1) Use concise, accurate thread titles. Poor thread titles, like
>>> Please
>>>>>>>> Help, Urgent, Need Help, Formula Problem, Code Problem, and Need
>>> Advice
>>>>>>> will
>>>>>>>> not get quick attention or may not be answered.
>>>>>>>>
>>>>>>>> 2) Don't post a question in the thread of another member.
>>>>>>>>
>>>>>>>> 3) Don't post questions regarding breaking or bypassing any
security
>>>>>>>> measure.
>>>>>>>>
>>>>>>>> 4) Acknowledge the responses you receive, good or bad.
>>>>>>>>
>>>>>>>> 5) Cross-promotion of, or links to, forums competitive to this
forum
>>> in
>>>>>>>> signatures are prohibited.
>>>>>>>>
>>>>>>>> NOTE : Don't ever post personal or confidential data in a workbook.
>>>>> Forum
>>>>>>>> owners and members are not responsible for any loss.
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>
----------------------------------------------------------------------------
>>>>>>> --------------------------
>>>>>>>> To post to this group, send email to excel-macros@googlegroups.com
>>>>>>>
>>>>>>> --
>>>>>>> FORUM RULES (986+ members already BANNED for violation)
>>>>>>>
>>>>>>> 1) Use concise, accurate thread titles. Poor thread titles, like
Please
>>>>>>> Help, Urgent, Need Help, Formula Problem, Code Problem, and Need
Advice
>>>>>> will
>>>>>>> not get quick attention or may not be answered.
>>>>>>>
>>>>>>> 2) Don't post a question in the thread of another member.
>>>>>>>
>>>>>>> 3) Don't post questions regarding breaking or bypassing any security
>>>>>>> measure.
>>>>>>>
>>>>>>> 4) Acknowledge the responses you receive, good or bad.
>>>>>>>
>>>>>>> 5) Cross-promotion of, or links to, forums competitive to this
forum
>>> in
>>>>>>> signatures are prohibited.
>>>>>>>
>>>>>>> NOTE : Don't ever post personal or confidential data in a workbook.
>>>>> Forum
>>>>>>> owners and members are not responsible for any loss.
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>
----------------------------------------------------------------------------
>>>>>>> --------------------------
>>>>>>> To post to this group, send email to excel-macros@googlegroups.com
>>>>>>>
>>>>>>> --
>>>>>>> FORUM RULES (986+ members already BANNED for violation)
>>>>>>>
>>>>>>> 1) Use concise, accurate thread titles. Poor thread titles, like
Please
>>>>>> Help, Urgent, Need Help, Formula Problem, Code Problem, and Need
Advice
>>>>> will
>>>>>> not get quick attention or may not be answered.
>>>>>>>
>>>>>>> 2) Don't post a question in the thread of another member.
>>>>>>>
>>>>>>> 3) Don't post questions regarding breaking or bypassing any security
>>>>>> measure.
>>>>>>>
>>>>>>> 4) Acknowledge the responses you receive, good or bad.
>>>>>>>
>>>>>>> 5) Cross-promotion of, or links to, forums competitive to this
forum
>>> in
>>>>>> signatures are prohibited.
>>>>>>>
>>>>>>> NOTE : Don't ever post personal or confidential data in a workbook.
>>>>> Forum
>>>>>> owners and members are not responsible for any loss.
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>
----------------------------------------------------------------------------
>>>>>> --------------------------
>>>>>>> To post to this group, send email to excel-macros@googlegroups.com
>>>>>>
>>>>>> --
>>>>>> FORUM RULES (986+ members already BANNED for violation)
>>>>>>
>>>>>> 1) Use concise, accurate thread titles. Poor thread titles, like
Please
>>>>>> Help, Urgent, Need Help, Formula Problem, Code Problem, and Need
Advice
>>>>> will
>>>>>> not get quick attention or may not be answered.
>>>>>>
>>>>>> 2) Don't post a question in the thread of another member.
>>>>>>
>>>>>> 3) Don't post questions regarding breaking or bypassing any security
>>>>>> measure.
>>>>>>
>>>>>> 4) Acknowledge the responses you receive, good or bad.
>>>>>>
>>>>>> 5) Cross-promotion of, or links to, forums competitive to this forum
in
>>>>>> signatures are prohibited.
>>>>>>
>>>>>> NOTE : Don't ever post personal or confidential data in a workbook.
>>> Forum
>>>>>> owners and members are not responsible for any loss.
>>>>>>
>>>>>>
>>>>>
>>>
----------------------------------------------------------------------------
>>>>>> --------------------------
>>>>>> To post to this group, send email to excel-macros@googlegroups.com
>>>>>>
>>>>>> --
>>>>>> FORUM RULES (986+ members already BANNED for violation)
>>>>>>
>>>>>> 1) Use concise, accurate thread titles. Poor thread titles, like
Please
>>>>> Help, Urgent, Need Help, Formula Problem, Code Problem, and Need
Advice
>>> will
>>>>> not get quick attention or may not be answered.
>>>>>>
>>>>>> 2) Don't post a question in the thread of another member.
>>>>>>
>>>>>> 3) Don't post questions regarding breaking or bypassing any security
>>>>> measure.
>>>>>>
>>>>>> 4) Acknowledge the responses you receive, good or bad.
>>>>>>
>>>>>> 5) Cross-promotion of, or links to, forums competitive to this forum
in
>>>>> signatures are prohibited.
>>>>>>
>>>>>> NOTE : Don't ever post personal or confidential data in a workbook.
>>> Forum
>>>>> owners and members are not responsible for any loss.
>>>>>>
>>>>>>
>>>>>
>>>
----------------------------------------------------------------------------
>>>>> --------------------------
>>>>>> To post to this group, send email to excel-macros@googlegroups.com
>>>>>
>>>>> --
>>>>> FORUM RULES (986+ members already BANNED for violation)
>>>>>
>>>>> 1) Use concise, accurate thread titles. Poor thread titles, like
Please
>>>>> Help, Urgent, Need Help, Formula Problem, Code Problem, and Need
Advice
>>> will
>>>>> not get quick attention or may not be answered.
>>>>>
>>>>> 2) Don't post a question in the thread of another member.
>>>>>
>>>>> 3) Don't post questions regarding breaking or bypassing any security
>>>>> measure.
>>>>>
>>>>> 4) Acknowledge the responses you receive, good or bad.
>>>>>
>>>>> 5) Cross-promotion of, or links to, forums competitive to this forum
in
>>>>> signatures are prohibited.
>>>>>
>>>>> NOTE : Don't ever post personal or confidential data in a workbook.
>>> Forum
>>>>> owners and members are not responsible for any loss.
>>>>>
>>>>>
>>>
----------------------------------------------------------------------------
>>>>> --------------------------
>>>>> To post to this group, send email to excel-macros@googlegroups.com
>>>>>
>>>>> --
>>>>> FORUM RULES (986+ members already BANNED for violation)
>>>>>
>>>>> 1) Use concise, accurate thread titles. Poor thread titles, like
Please
>>> Help, Urgent, Need Help, Formula Problem, Code Problem, and Need Advice
will
>>> not get quick attention or may not be answered.
>>>>>
>>>>> 2) Don't post a question in the thread of another member.
>>>>>
>>>>> 3) Don't post questions regarding breaking or bypassing any security
>>> measure.
>>>>>
>>>>> 4) Acknowledge the responses you receive, good or bad.
>>>>>
>>>>> 5) Cross-promotion of, or links to, forums competitive to this forum
in
>>> signatures are prohibited.
>>>>>
>>>>> NOTE : Don't ever post personal or confidential data in a workbook.
>>> Forum owners and members are not responsible for any loss.
>>>>>
>>>>>
>>>
----------------------------------------------------------------------------
>>> --------------------------
>>>>> To post to this group, send email to excel-macros@googlegroups.com
>>>
>>> --
>>> FORUM RULES (986+ members already BANNED for violation)
>>>
>>> 1) Use concise, accurate thread titles. Poor thread titles, like Please
>>> Help, Urgent, Need Help, Formula Problem, Code Problem, and Need Advice
will
>>> not get quick attention or may not be answered.
>>>
>>> 2) Don't post a question in the thread of another member.
>>>
>>> 3) Don't post questions regarding breaking or bypassing any security
>>> measure.
>>>
>>> 4) Acknowledge the responses you receive, good or bad.
>>>
>>> 5) Cross-promotion of, or links to, forums competitive to this forum in
>>> signatures are prohibited.
>>>
>>> NOTE : Don't ever post personal or confidential data in a workbook.
Forum
>>> owners and members are not responsible for any loss.
>>>
>>>
----------------------------------------------------------------------------
>>> --------------------------
>>> To post to this group, send email to excel-macros@googlegroups.com
>>>
>>> --
>>> FORUM RULES (986+ members already BANNED for violation)
>>>
>>> 1) Use concise, accurate thread titles. Poor thread titles, like Please
Help, Urgent, Need Help, Formula Problem, Code Problem, and Need Advice will
not get quick attention or may not be answered.
>>>
>>> 2) Don't post a question in the thread of another member.
>>>
>>> 3) Don't post questions regarding breaking or bypassing any security
measure.
>>>
>>> 4) Acknowledge the responses you receive, good or bad.
>>>
>>> 5) Cross-promotion of, or links to, forums competitive to this forum in
signatures are prohibited.
>>>
>>> NOTE : Don't ever post personal or confidential data in a workbook.
Forum owners and members are not responsible for any loss.
>>>
>>>
----------------------------------------------------------------------------
--------------------------
>>> To post to this group, send email to excel-macros@googlegroups.com
--
FORUM RULES (986+ members already BANNED for violation)
1) Use concise, accurate thread titles. Poor thread titles, like Please
Help, Urgent, Need Help, Formula Problem, Code Problem, and Need Advice will
not get quick attention or may not be answered.
2) Don't post a question in the thread of another member.
3) Don't post questions regarding breaking or bypassing any security
measure.
4) Acknowledge the responses you receive, good or bad.
5) Cross-promotion of, or links to, forums competitive to this forum in
signatures are prohibited.
NOTE : Don't ever post personal or confidential data in a workbook. Forum
owners and members are not responsible for any loss.
----------------------------------------------------------------------------
--------------------------
To post to this group, send email to excel-macros@googlegroups.com
--
FORUM RULES (986+ members already BANNED for violation)
1) Use concise, accurate thread titles. Poor thread titles, like Please Help,
Urgent, Need Help, Formula Problem, Code Problem, and Need Advice will not get
quick attention or may not be answered.
2) Don't post a question in the thread of another member.
3) Don't post questions regarding breaking or bypassing any security measure.
4) Acknowledge the responses you receive, good or bad.
5) Cross-promotion of, or links to, forums competitive to this forum in
signatures are prohibited.
NOTE : Don't ever post personal or confidential data in a workbook. Forum
owners and members are not responsible for any loss.
------------------------------------------------------------------------------------------------------
To post to this group, send email to excel-macros@googlegroups.com
