My fault, I thought I put it in there, I only have the one cdrom drive, and I do make image files to the hd. Thought it doesnt matter. If I try to dup a CD or try to move files from hd to cd. Same result. Brian -----Original Message----- From: Scott Tyson [mailto:[EMAIL PROTECTED]] Sent: Monday, November 13, 2000 3:15 PM To: [EMAIL PROTECTED] Subject: Re: [expert] cdr writing You might be getting buffer underruns. I haven't seen one of these with Xcdroast so I'm not sure what it spits back when it deos hit one. Try putting the cd contents to Disc then burning from there. When I do cd-cd copies under Windows I have to do this or I get underruns. *********** REPLY SEPARATOR *********** On 11/13/2000 at 2:54 PM Klar Brian D Contr MSG/SWS scribbled: >I am having real problems trying to burn a CD-R. No matter what program I >use, or what account I am >under (i.e. root, or other users). When I try to either copy a CD, or make a >DATA CD, 5 Megs into it >I get a failure, medium error. I can burn a CD-RW with no problems though. I >find it hard to believe that I >am getting the bad one of the stack in Linux, when win will burn every CD >correctly, instead of a coaster. >Here is the output of cdrecord on one try. I think I was using Xcdroast >here. > >pregap1: -1 >Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg >Schilling >TOC Type: 1 = CD-ROM >scsidev: '0,0,0' >scsibus: 0 target: 0 lun: 0 >Linux sg driver version: 2.1.39 >Using libscg version 'schily-0.1' >atapi: 1 >Device type : Removable CD-ROM >Version : 0 >Response Format: 1 >Vendor_info : 'SONY ' >Identifikation : 'CD-RW CRX100E ' >Revision : '1.0j' >Device seems to be: Generic mmc CD-RW. >Using generic SCSI-3/mmc CD-R driver (mmc_cdr). >Driver flags : SWABAUDIO >Drive buf size : 1040128 = 1015 KB >FIFO size : 4194304 = 4096 KB >Track 01: data 500 MB >Total size: 575 MB (56:59.94) = 256496 sectors >Lout start: 575 MB (57:01/71) = 256496 sectors >Current Secsize: 2048 >ATIP start of lead in: -11640 (97:26/60) >ATIP start of lead out: 359849 (79:59/74) >Disk type: Long strategy type (Cyanine, AZO or similar) >Manuf. index: 3 >Manufacturer: CMC Magnetics Corporation >Blocks total: 359849 Blocks current: 359849 Blocks remaining: 103353 >Starting to write CD/DVD at speed 2 in write mode for single session. >Waiting for reader process to fill input buffer ... >input buffer ready. >Performing OPC... >Sending CUE sheet... >cdrecord: WARNING: Drive returns wrong startsec (0) using -150 >Writing pregap for track 1 at -150 >Starting new track at sector: 0 >CDB: 2A 00 00 00 0D CE 00 00 1F 00 >cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error >Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 0C 09 00 00 >status: 0x2 (CHECK CONDITION) >Sense Key: 0x3 Medium Error, Segment 0 >Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0 >Sense flags: Blk 0 (not valid) > >write track data: error after 7237632 bytes >Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00 >Writing time: 113.651s >Fixating... >Fixating time: 0.004s > >Any help would be appreciated since I only use windows right now for >scanning since I can not find >support for my parallel scanner. Not a big issue right now either since I >put the scanner on my gf's >machine. > >I can burn a CD-RW with any program I wish to use. >System is PII-450 > 128M RAM > Sony CRX-100E internal IDE > KDE2 as my environment > >I have tried to copy both a previously burned cd, and an original >manufactured CD. >When I burn a CD, that is all I do, I don't try to run other apps nor do I >surf. >So I have ruled out CPU process problems. > >HELP!!! > >Brian D. Klar - CVE >OTS >WPAFB >(937)257-5773 >937-973-3125 (Pager) > > > >Keep in touch with http://mandrakeforum.com: >Subscribe the "[EMAIL PROTECTED]" mailing list.
Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
