Klar Brian D Contr MSG/SWS wrote: > I am having real problems trying to burn a CD-R. No matter what program I > use, or what account I am > under (i.e. root, or other users). When I try to either copy a CD, or make a > DATA CD, 5 Megs into it > I get a failure, medium error. I can burn a CD-RW with no problems though. I > find it hard to believe that I > am getting the bad one of the stack in Linux, when win will burn every CD > correctly, instead of a coaster. > Here is the output of cdrecord on one try. I think I was using Xcdroast > here. > > pregap1: -1 > Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg > Schilling > TOC Type: 1 = CD-ROM > scsidev: '0,0,0' > scsibus: 0 target: 0 lun: 0 > Linux sg driver version: 2.1.39 > Using libscg version 'schily-0.1' > atapi: 1 > Device type : Removable CD-ROM > Version : 0 > Response Format: 1 > Vendor_info : 'SONY ' > Identifikation : 'CD-RW CRX100E ' > Revision : '1.0j' > Device seems to be: Generic mmc CD-RW. > Using generic SCSI-3/mmc CD-R driver (mmc_cdr). > Driver flags : SWABAUDIO > Drive buf size : 1040128 = 1015 KB > FIFO size : 4194304 = 4096 KB > Track 01: data 500 MB > Total size: 575 MB (56:59.94) = 256496 sectors > Lout start: 575 MB (57:01/71) = 256496 sectors > Current Secsize: 2048 > ATIP start of lead in: -11640 (97:26/60) > ATIP start of lead out: 359849 (79:59/74) > Disk type: Long strategy type (Cyanine, AZO or similar) > Manuf. index: 3 > Manufacturer: CMC Magnetics Corporation > Blocks total: 359849 Blocks current: 359849 Blocks remaining: 103353 > Starting to write CD/DVD at speed 2 in write mode for single session. > Waiting for reader process to fill input buffer ... > input buffer ready. > Performing OPC... > Sending CUE sheet... > cdrecord: WARNING: Drive returns wrong startsec (0) using -150 > Writing pregap for track 1 at -150 > Starting new track at sector: 0 > CDB: 2A 00 00 00 0D CE 00 00 1F 00 > cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error > Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 0C 09 00 00 > status: 0x2 (CHECK CONDITION) > Sense Key: 0x3 Medium Error, Segment 0 > Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0 > Sense flags: Blk 0 (not valid) > >From the above message it appears that you have a bad disk. Maybe a previous write cause it or simply one from the manufacture that's bad. Try a new disk. > > write track data: error after 7237632 bytes > Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00 > Writing time: 113.651s > Fixating... > Fixating time: 0.004s > > Any help would be appreciated since I only use windows right now for > scanning since I can not find > support for my parallel scanner. Not a big issue right now either since I > put the scanner on my gf's > machine. > > I can burn a CD-RW with any program I wish to use. > System is PII-450 > 128M RAM > Sony CRX-100E internal IDE > KDE2 as my environment > > I have tried to copy both a previously burned cd, and an original > manufactured CD. > When I burn a CD, that is all I do, I don't try to run other apps nor do I > surf. > So I have ruled out CPU process problems. > > HELP!!! > > Brian D. Klar - CVE > OTS > WPAFB > (937)257-5773 > 937-973-3125 (Pager) > > ------------------------------------------------------------------------ > Keep in touch with http://mandrakeforum.com: > Subscribe the "[EMAIL PROTECTED]" mailing list. -- Sword'sEdge VoiceMail/Fax: (858) 860-6406 x1587
Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
