I'm changing a Linux partition from SuSE6.4 to Mandrake7.2 and am having
trouble getting the Mandrake to realize that there is an ethernet card. I
ran pmpdump and got the following:
# $Id: pnpdump.c,v 1.19 1999/10/16 15:17:17 fox Exp $
# Release isapnptools1.19
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
#
# For details of this file format, see isapnp.conf(5)
#
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
#
# Compiler flags: DREALTIME DNEEDSETSCHEDULER DABORT_ONRESERR
#
# Trying port address 0273
# Board 1 has serial identifier 86 cb 40 73 05 01 22 05 07
# (DEBUG)
(READPORT 0x0273)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
# Card 1: (serial identifier 86 cb 40 73 05 01 22 05 07)
# Vendor Id AXE2201, Serial Number 3409998597, checksum 0x86.
# Version 1.0, Vendor version 0.0
# ANSI string >Ethernet PnP ISA Card /S <
#
# Logical device id AXE2201
# Device supports I/O range check register
# Device supports vendor reserved register @ 0x38
# Device supports vendor reserved register @ 0x39
# Device supports vendor reserved register @ 0x3a
# Device supports vendor reserved register @ 0x3b
# Device supports vendor reserved register @ 0x3c
# Device supports vendor reserved register @ 0x3d
# Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed
if required
# Don't forget to uncomment the activate (ACT Y) when happy
(CONFIGURE AXE2201/3409998597 (LD 0
# Compatible device id PNP80d6
# Logical device decodes 10 bit IO address lines
# Minimum IO base address 0x0240
# Maximum IO base address 0x0380
# IO base alignment 32 bytes
# Number of IO addresses required: 32
# (IO 0 (SIZE 32) (BASE 0x0240) (CHECK))
# IRQ 3, 5, 9, 10, 11, 12 or 15.
# High true, edge sensitive interrupt
# (INT 0 (IRQ 3 (MODE +E)))
(NAME "AXE2201/3409998597[0]{Ethernet PnP ISA Card /S }")
# (ACT Y)
))
# End tag... Checksum 0x00 (OK)
# Returns all cards to the "Wait for Key" state
(WAITFORKEY)
I'm not sure just what I'm supposed to comment out, and any help will be
appreciated.
Thanks in return.
Stephen P. Molnar, Ph.D. Life is a fuzzy set
Foundation for Chemistry Multivariant and
stochastic
http://web.jadeinc.com/FoundationChem
