Do a modprobe ide-scsi, setup the link in /dev
Brian
-----Original Message-----
From: Mike MacCana [mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 15, 2001 7:36 AM
To: Bill Kenworthy
Cc: [EMAIL PROTECTED]
Subject: Re: [expert] CD-RW - how do I get it working?
What have you missed?
A single space.
append=" hde=ide-scsi"
Should be it.
Mike
On Wed, 14 Mar 2001, Bill Kenworthy wrote:
> Can you do an "lsmod" and post the results along with those from
> "cdrecord -scanbus". A list of your modules.conf would also be handy.
> CDRW is a can of worms if you install it into an already running
> Mandrake system! Also have you run the script from the howto to check
> your setup (basicly what I requested above), and checked the /dev/cdrom[
> 01] link is pointing to the correct place? I recently added a Sony 140E
> which now works well, but it was close to being installed in a windoze
> machine just to get a working setup after quite a few hours of work.
>
> BillK
>
> Praedor Tempus wrote:
> >
> > I recently added a sony atapi cd-rw drive to my 7.2/8.0 system. I have read
> > the howto on this subject and as a result, recompiled my kernel to support
> > scsi emulation and then added 'append="hde=ide-scsi"' to my lilo.conf file
> > for the new kernel.
> >
> > Now, I see no evidence that the CD-RW drive is being seen as "scsi" so I
> > still am unable to burn any CDs with it.
> >
> > What have I missed? This CD-RW drive is the second CDROM drive on my system.
> > I still have my original atapi cdrom, which is handled as IDE by default.
> >
> > --
> > Against stupidity, the gods themselves contend in vain.
>
>