I performed some more tests, all negative : in the BIOS, I noticed two parameters : IDE secondary master PIO : Auto - other possible values : Mode 0 - Mode 1 - Mode 2 - Mode 3 - Mode 4 IDE secondary master UDMA : Auto - other possible value : Disabled
So I set "IDE secondary master UDMA" to "Disabled", and tried each possible value for "IDE secondary master PIO", each time rebooting and running harddrake2 - with no success On Friday 11 October 2002 21:21, Klar Brian D Contr MSG/SICN wrote: > I haven't tried mcc, however I have tried linuxconf. > No success there > I will try when I get home removing hdb from lilo.conf. > I don't recall if I have tried that in my attempts tho. > > Thanks, > > Brian D. Klar - CVE > OTS > WPAFB > > -----Original Message----- > From: Charles A Edwards [mailto:[EMAIL PROTECTED]] > Sent: Friday, October 11, 2002 3:19 PM > To: [EMAIL PROTECTED] > Subject: Re: [expert] Iomega Zip not detected under v9.0 > > > On Fri, 11 Oct 2002 14:50:12 -0400 > > Klar Brian D Contr MSG/SICN <[EMAIL PROTECTED]> wrote: > > mcc/mount points ?? > > mcc=Mandrake Control Center then select Mount Points where you can > graphically set the mount points for your devices and set their > attributes. > > It is supposed to now not be necessary but boot with hdb=ide-scsi in > your lilo appends then try accessing the drive with the sda4 fstab > listing. > > I have 5 systems with zip drives, 3 USB and 2 ide, and all work well but > of these only 1, a USB, is a clean 9.0 install all the others are > updated cookers. > > > Charles > > --------------------------- > A homeowner's reach should exceed his grasp, or what's a weekend for? > ---------------------- > Charles A Edwards > [EMAIL PROTECTED] > ---------------------- -- Robert Grasso @home --- UNIX was not designed to stop you from doing stupid things, because that would also stop you from doing clever things. -- Doug Gwyn
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com