Thanks again.
At 18:27 2002-10-19 -0500, you wrote:
On Saturday October 19 2002 04:00 pm, Richard Laframboise wrote:
> Thanks Tom for the info but how can I configure my ide cd to be known
> as a scsi device
They have to be, otherwise they wouldn't work at all, even under
windoze ;) There is no such thing as an 'Integrated Drive Electronics/
AT-Attachment' CD-RW without being SCSI emulated, any OS. Lilo(conf)
should have/needs 'ide-scsi' on the kernel parameter append line, eg,
somethin like append=" devfs=mount hdd=ide-scsi" and then you
should see somethin like ...
$ cd /dev
dev$ ll scd*
lr-xr-xr-x 1 root root 31 Oct 19 10:38 scd0 ->
scsi/host0/bus0/target3/lun0/cd
Another check is to run 'cdrecord -scanbus' which for my burner as
slave on second ide (ide1, hdd) returns
scsibus0:
|
0,3,0 3) 'PLEXTOR ' 'CD-R PX-W8432T' '1.09' Removable CD-ROM
See the relationship bus 0, target 3, lun 0 ... and scd0 -> ? With
the same hardware, no config changes, but different Mandrake installs,
my burner was sometimes 0,0,0. Your burner could also be scd<number?>
depending whether you have other scsi or scsi emulated devices, so
check your particular install.
Maybe i don't understand what you're askin ? mea culpa, sorry
--
Tom Brinkman Corpus Christi, Texas
>
> At 15:50 2002-10-19 -0500, you wrote:
> >On Saturday October 19 2002 02:15 pm, Richard Laframboise wrote:
> > > Hi List,
> > >
> > > I have an IDE CD burner - Plextor 8/4/32A - How can I
> > > address it as if it was a SCSI device ?
> > >
> > > Purpose : To make backups
> >
> > I've got the same burner, it's slave on ide1 (hdd), and ide-scsi
> >makes it /dev/scd0
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Groupe Richard Laframboise Consultants Inc.
C.P. 266
St-Eustache, Qc
Canada
J7R 4K6