I'll check bascule, but right now I'm getting no temp info from just running sensors on the command line :(
Si ----- Original Message ----- From: bascule <[EMAIL PROTECTED]> Date: Mon, 27 Jan 2003 19:45:50 +0000 To: [EMAIL PROTECTED] Subject: Re: [expert] lm_sensors on gigabyte ga-7zxe > just to butt in, if using gkrellm have you entered names for the temp > readings? in my stock 9.0 install gkrellm wont show the readings untill you > give then a label via the config dialogue > > sorry if this is off beam > > bascule > > On Monday 27 Jan 2003 6:15 pm, flacycads wrote: > > > Then after a shutdown/reboot, open gkrellm and the readouts will now > > include the cpu/chassis temp, and fan speed readouts. Contrary to what's > > commonly believed, I have found you sometimes need to shut down and reboot > > linux when performing some prodedures, to completely flush out the Ram of > > everything. If you don't, sometimes things simply will not work. While far > > better than windows, linux is still not perfect in this respect. > > > -- > Stupid men are often capable of things the clever would not dare to > contemplate... > (Feet of Clay) > > > > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com -- __________________________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup Meet Singles http://corp.mail.com/lavalife
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com