On Saturday 01 March 2003 11:43 pm, Mark wrote: > Hi Everyone, > > I am having problems with what looks like scsi emu probs, I am using > mandrake 9 and a Duron 1.3g .. the problem is I have a LG 48x16x48 cdr > drive no matter what i try I can not burn quicker than 8x with out > having problem like > > ./cdrecord: Input/output error. send opc: scsi sendcmd: no error > CDB: 54 01 00 00 00 00 00 00 00 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 06 00 00 00 00 0A 00 00 00 00 29 00 00 00 > Sense Key: 0x6 Unit Attention, Segment 0 > Sense Code: 0x29 Qual 0x00 (power on, reset, or bus device reset > occurred) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 60.041s timeout 60s > ./cdrecord: OPC failed. > Writing time: 65.709s > BURN-Free was never needed. > ./cdrecord: fifo had 64 puts and 0 gets. > ./cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. > > O.k. I have pulled down the latest cdrecord,compiled it, but does not > look like the problem.. since it does work at 8x.. had a play with > hdparm, switching off and on DMA, but it does not seem to make much > difference... any ideas? > > Cheers
well there are only about 3 million reasons you could have such a problem, and without asking a few more questions, I don't think you will be able to get a clearer answer. are you using a command line or a GUI to burn? what command or GUI have you tried? are you burning a file from a local hard drive? cd to cd "burn on the fly"? what IDE bus is the CD burner on? I recomend burning no faster than 8x anytime and anyway, for insurance against "overcoastering". (creating more coasters than my microwave can zap in one 24 hour period.) > Mark
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
